JavaScript is not enabled.
Aec - 0 Reviews - 1310 W Elm St, Athens, AL - Engineering Services Reviews - Phone (256) 278-0371


id: 29826987
1310 W Elm St
Athens, AL 35611
(256) 278-0371
Incorrect info? Correct your listing
15% OFF all yearly plans
Use year15 at checkout. Expires 3/1/2019

An ISO 9001:2008 & ISO/TS 16949:2009 Company.

Owner Message

  • 1973 Partnership firm formed by five technocrats. Started manufacturing needle roller cage assemblies with the manpower of 10 and the capital investment of 3500 US Dollars. 1974 Started manufacturing cylindrical roller bearings and deep groove ball bearings up to 50mm diameter. 1975 Started manufacturing single row spherical roller bearings. 1978 Partnership firm converted into Private Limited Company. Started manufacturing tapered Roller Bearing up to 100mm diameter. 1980 Manufacturing capacity of all aforesaid bearings increased up to 150mm diameter. 1982 Started supplying bearings for gear box application to Premier Automobiles Limited (FIAT-Italy Collaboration) for passenger cars. 1984 Started supplying case carburized specially heat treated ground components (exclusive supplier) and King-pin bearings to TELCO for light and heavy commercial vehicles. 1985 Converted into Public Llimited Company and offered shares to public. 1986 Started New Plant (Unit II) with installation of machinery and testing/measuring equipment imported from Germany. Started exporting bearings to developed countries such as UK, USA, and Italy. 1987 Started manufacturing import substitute bearings for military tanks and armed vehicles of Indian Defense Department. 1990 Increased manufacturing capacity to 600mm diameter. Started manufacturing double row tapered and spherical roller bearings. 1991 Awarded indefinite rate contract with All India State Road Transport Undertakings (ASRTU) for 78 sizes of bearings for their passengers vehicles. 1993 Started manufacturing flexible roller bearings. 1995 Manufacturing capacity increased to 800mm diameter. 1997 Started manufacturing flush ground single row angular contact ball bearings for US and European Markets. 1998 Started production of four row tapered roller and mutli-row cylinderical roller bearings for roll-neck application in steel plants. 1999 Awarded ISO 9001 Certification for design and manufacturing of all type of rolling bearings from TUV Rheinland. 2000 Established AEC Europe S.R.L in Milan, Italy. 2002 Developed stainless steel (Grade 440C) bearings (for Atomic Energy Plant). 2003 Developed and supplied Screw Down bearing (equivalent to Torrington 202 TTSX 942 EE2000). 2004 Developed Slim bearings (Constant Section Bearings) up to 18 inch. Established Accurate Engineering Inc. (WOS of AEC Ltd.) in USA. 2006 Achieved ISO/TS 16949:2002 Certification for design and manufacturing of all type of rolling bearings from TUV Rheinland. 2008 Developed crossed cylindrical and tapered roller bearings. 2009 Enhanced the capacity of cylindrical and tapered roller bearings. 2010 Developed large bearing weighing 3,500 kg with segmented cage. 2012 Achieved ISO 14001:2004 and OHSAS 18001:2007 certifications.

Additional information

  • Hours:

    Mon - Tue 9:00 am - 5:00 pm, Wed 10:00 am - 5:00 pm, Thu 8:00 am - 4:00 pm, Sat 1:00 pm - 4:00 pm